CJ1W-ID211 Omron CJ1 Series PLC Digital Input Module
CJ1W-ID211 DC Input Unit (24 VDC, 16 Points)
Omron PLC extension module
The Omron PLC extension module has 16 digital inputs and 1 word allocated. It enables digital I/O, analogue I/O and communication modules to clip together to the right of the CPU in any combination to increase the system throughput. Modules can be connected to the system as a part of an expansion assembly to receive the ON/OFF signals from external devices into the PLC system to update I/O memory in the CPU unit. A wide range of CJ series input units is available featuring high-speed input and suitability for various applications. This module is used with SYSMAC CJ Series.
Features and Benefits
High-speed inputs available
ON response rime: 15μs OFF response time: 90μs
This 24VDC model can be connected to devices with either NPN or PNP outputs
No need to select the polarity
A digital filter in the unit can be set from 0ms to 32ms to reduce the influence of external noise
Either a Fujitsu or MIL connector interface can be used
Removable screw terminal block conversion units are available, making it easy to connect to external devices
Applications
Industrial automation
Robotics
Automobiles industry
Certifications
CE
cULus approved
Lloyd approved
NK certified
UC1 listed
| Name | 16-point DC Input Unit with Terminal Block | |
|---|---|---|
| Model | CJ1W-ID211 | |
| Rated Input Voltage | 24 VDC | |
| Rated Input Voltage Range | 20.4 to 26.4 VDC | |
| Input Impedance | 3.3 kΩ | |
| Input Current | 7 mA typical (at 24 VDC) | |
| ON Voltage/ON Current | 14.4 VDC min./3 mA min. | |
| OFF Voltage/OFF Current | 5 VDC max./1 mA max. | |
| ON Response Time | 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 | |
| OFF Response Time | 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 | |
| Number of Circuits | 16 (16 points/common, 1 circuit) | |
| Number of Simultaneously ON Points |
100% simultaneously ON (at 24 VDC) (Refer to the following illustration.) | |
| Insulation Resistance | 20 MΩ min. between external terminals and the GR terminal (100 VDC) | |
| Dielectric Strength | 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. |
|
| Internal Current Consumption | 80 mA max. | |
| Weight | 110 g max. | |
| Circuit Configuration |
 The signal names of the terminals are the device variable names. The device variable names are the names that use “Jxx” as the device name. |
 |
| External connection and terminal-device variable diagram |
 Polarity of the input power supply can be connected in either direction. The signal names of the terminals are the device variable names. The device variable names are the names that use “Jxx” as the device name. |
|
8-point/16-point Units (18-point Terminal Blocks)
CJ1W-ID201
CJ1W-ID211
CJ1W-ID212
CJ1W-IA201
CJ1W-IA111
| Categories | Industrial Automation and Controls | |
|---|---|---|
| Controllers – PLC Modules | ||
| Manufacture | Omron Automation and Safety | |
| Series | CJ1W | |
| Part Status | Active | |
| Type | Input Module | |
| For Use With/Related Products | CJ Series | |
| Number of Inputs and Type | 16 – Digital | |
| Number of Outputs and Type | – | |
| Voltage – Supply | – | |
| Mounting Type | DIN Rail | |
| Termination Style | Screw Terminal | |
| Features | – | |
| Operating Temperature | – | |
| Ingress Protection | – | |
| Approval Agency | CE, cULus, Lloyd, NK | |
| Weight | 0.243 lb (110.22 g) |
The product is suitable for:
http://www.kemeriautomation.com/product/omron-cqm1h-cpu21-plc-unit/
Manufacturer’s website:
